Flush Mount Track

The Flush Mount Track is the strongest and most discreet wall-mounted track system that can be incorporated at the construction phase of a project.

Our Flush Mount Track -  Andy Warhol @ The Whisper Gallery, London

Track System Installation

This is our most robust track. With the correct installation, it will carry loads of half a tonne. At the same time, it is also our most discreet track, with a narrow slot of just 8mm visible when the track is installed. The Flush Mount Track has been designed for installation during the construction phase and will blend seamlessly with the building structure to provide a readily accessible fixing, enabling artworks to be hung at any point and any height.

* Required Fields

Price: £48.00 (Excl. VAT)

Key Features of the Flush Mount Track

  • The strongest track system for hanging artworks
  • Track can be incorporated into the wall at construction phase
  • Use in conjunction with our hanging sets or hang directly onto the track
  • Our most discreet track system - aperture just 8mm
  • Choice of white or silver finish
  • Comes in 2.5m lengths

Next steps: Choose the right hanging method…

Once you have selected your required track you will need to specify the type of hanging system you require.

Simple Flexibility

The Flush Mount is very easy to use. Artworks can be hung from clips inserted at any point along the track, and suspended using a choice of transparent cord, stainless steel cable or stainless steel rod. As well as this, because the track is completely flush with the wall, we even have a clip for you to hang the picture directly onto the track.

Dimensions and Finish

Flush Mount Track is an anodised aluminium extrusion that is available in either soft silver finish or white and comes in lengths of 2.5m. The track has a total vertical height of 55mm x 15mm width. It comes pre-drilled and is easy to cut to length on site. Note: There is a slight widening to allow for the top blocks for the hanging sets to be inserted 100mm in from one end, the track should be trimmed from the opposite end.

Useful Tips and Guidelines

For the best result we recommend installation during the construction phase of your project. After fixing, most of the track is then covered by the drywall cladding, meaning that the Flush Mount Track becomes a seamless element of the building.

The track comes pre-drilled ready for fixing. If you wish to hang very heavy artworks (in excess of 150kg) then we recommend drilling more frequent fixing points. For fixing your Flush Mount Track, we recommend #8 (4mm) wood screws. The track can then sustain loads in excess of 400kg with the appropriate clips and rods. Please contact us for details of high load hangings.

If you are installing multiple lengths of Flush Mount Track, we supply simple connecting pins that help you to align the lengths of track for an even finish. These are inserted in the 2mm holes at the end of the track, connecting both lengths. Connecting pins will only be supplied with orders of 2 or more lengths.

There are a choice of components that will work with the Flush Mount Track to suit your installation. The accessories are sold in sets that include a pair of hanging lengths, top blocks and fixings. You will need a set per work and can choose either a barrel for use with our Ryman Hanger, or a hook if your work will be hung with a wire. All accessories can also be purchased separately, should you wish to hang more than one work per hanging length set.

What’s included

1 x 2.5m Length of Flush Mount Track

You may also require: Hanging Sets


Download the installation instructions below or for any questions contact our support team on:

01769 572389


Flush Mount Track

Bespoke Solutions.

Because we manufacture all of our own products, we can tailor them to your exact requirements.

Call 01769 572389

You may also require…